Specification :

The CCTV testerPRO is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, controlling PTZ, generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and portability makes it simple for the CCTV technician to install and maintain CCTV system, improving work efficiency and get the labor cost down.

2.1 Features
3.5" TFT-LCD , 960 H × 240 V resolution.
Video Level testing, video signals measured in IRE or mV
DC12V 1A power output for camera
Audio input testing
Digital multimeter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing.
Optical power meter, used for optic fiber CCTV monitor system, CATV system, optic fiber communication networks deployment and test.
PTZ control. Pan/ tilts the P/ T unit, zooms in/ out the lens, adjusts the focus, aperture and sets
and calls the preset position
Video displaying. Automatically adapts and displays the video format of NTSC/ PAL.
LCD Brightness/ Contrast/ Color Saturation are adjustable.
Video Generating, The PAL/ NTSC multi-system colorbar video generator ( seven-system switchable, transmit/ receive seven-system colorful imagines)
Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.
Cable testing. It is powerful in testing LAN cable, measuring the connecting status  displaying the sequence of connection and the NO. of the LAN cable.
Multi-interface and Multi-baud rate. Support RS232 , RS485 and RS422 interface; baud rate ranging from 150, 600 to 19200bps.
Multi-protocol. Supports more than twenty PTZ protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.
PTZ address scanning, search up the ID of PTZ camera.
Lithium Ion Polymer Battery ( 3.7V DC3000mAh) . The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 12 hours for normal use after charging for 4 hours.

General Specifications
MODEL CCTV Security TesterPRO
Video Test
Signal mode NTSC/ PAL ( Auto adapt)
Display 3.5 inch digital TFT-LCD , 960 x 240 resolution
LCD adjustment Brightness, Contrast, Saturation adjustable
Video IN/ OUT 1 channel BNC Input & 1 channel Output
Video Output Mode 1.0 Vp-p
Video Level test
Level test Video signals measured in IRE or mV
PTZ controller
Communication RS232, RS422 simplex and RS485
PTZ Protocol Compatible with more than 20 protocols such as PELCO-D/ P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
Video Signal Generation
Color bar generation Output one channel PAL/ NTSC colorbar video signal for testing monitor or video cable.
Digital multimeter
Multimeter Voltage, current, resistance and capacitance measuring, continuity testing, diode testing.
UTP CABLE TEST
UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output Output DC12V1A power for camera
Audio input test
Audio input test test the pickup and other audio equipments on the front-end
RS485 data analyst
Data Monitor Captures and analyzes the command data from controlling device
POWER
Power Adapter DC5V, 2A
Battery Built-in 3.7V Lithium polymer battery , 3000mAh
Rechargeable After charging 3-4 hour, working time lasts 12 hours
Low Consumption Energy saving technology
General
Working Temperature -30 ---+ 70
Working Humidity 30% -90%
Dimension/ Weight 176mmx94mmx36mm/ 340g

4.2 Multimeter specifications
Counts -6600^ + 6600
Conversion rate : 3 times/ s
Current modes for clamp meter with ZERO function
DC Voltage
Range Accuracy Resolution
660mV ( Manual range) ±  0.3% + 4 0.1mV
6.6V 1mV
66V 10mV
660V 100mV

AC Voltage
Range Accurac Resolution
660mV ( Manual range) ±  1.5% + 6 0.1mV
6.6V ±  0.8% + 6 1mV
66V 10mV
660V 100mV